IMG_1649

Large Dry Feeder – Centrally Controlled 16 pack with Control Unit

7,120.008,272.00

The Centrally controlled feeding system allows all feeders to be either individually or group operated from 1 location. The controller allows for 1-8 feeders to be operated up to 16 times per day. Each dry feeder allows you to dispense nuts, cubes, dry feed directly into your trough/manger.

Each feeder has its own power supply and one hard wired cable running to the controller

  • Capacity: 48kg
  • Size: 60m*50cm*30cm
  • Shell type: ABS Plastic with label
  • Packaged weight: 15kg
  • 12V unit comes supplied with 110/240V transformer
  • Not suitable for mixes, moist or wet feeds
  • Not suitable for chaff, alfalfa, straw, wet supplements or hay cubes

Supplied with

  • Simplefeeder owner & controller’s manual (1 off)
  • U Bolts & holding spacer & lock nuts (2 off) for mounting feeders on bars
  • Transformer 110/220VAC to 12V with 5m lead
  • Mounting Bar (1off) for mounting feeders on bars or walls
  • Wall mount anchor bolts (2 off)

C10 2X accessories B&W

Clear selection
SKU: N/A Category:
  • Optional Extras
  • Delivery
  • Help Centre

The SimpleFeeder prices are inclusive of a 1 Year Warranty and Delivery Insurance.

Do you need a timer for every Feeder?

Each SiMPLEFEEDER has a specific timer and therefore only runs a single feeder.

Does the SiMPLEFEEDER have a warranty?

Yes, every SiMPLEFEEDER comes with a 2 Year Limited Warranty please refer to the Terms and Conditions for additional information on policies.

What is the annual labour cost saving by using a C10 2X SiMPLEFEEDER?

Assume hourly cost of €10 US$ 12.50 or Stg£ 7.80 per hour.
A horse in training requires feeding four times a day.
Each feed requires at least 3 minutes of your time.
4 Feeding times x 3 min each x 365 days @ €10/hr.
Current Feeding Labour Cost = €730
3 min refilling time every 5th day x 365 days @ €10/hr & cleaning time.
SiMPLEFEEDER Labour cost = €80
No more overtime Labour rates.
Annual Labour Saving per SiMPLEFEEDER = €650 or US$819 or Stg£507

Recommended C30H Setup Procedure

  • Ensure it is plugged in and that the timer display is on
  • If the timer display is not “on” then please press the small reset button to get it going
  • Set the time to the current time
  • Set the start time to 1 hour before your feed and 30 minutes after (1.5-hour running time)
  • Example if you want to feed at 06:00 – set the start time to 05:00 and the finish time to 06:30

Things to watch out for

  • Ensure you have the heaters coming on for every feed not just the colder times of day
  • Ensure it is coming on 7 days a week (7 triangles)

What does the C in the product name mean?

We are currently on the third version of the FEEDER Range. The initial feeder was individually made in Ireland and placed in the market to gauge acceptance and get an understanding of the markets needs. The second version was introduced in June 2011. The “C” Versions were developed by Atlas Global Metal Solution Limited, who have spent four years developing it.

Have more questions?

You may also like…