1 CC & 4 C10s

Dry Feeder – Centrally Controlled 8 pack with Control Unit

Item No: C10-ABS-22-EU-W-00-CC

3,270.00

The Centrally controlled feeding system allows all feeders to be either individually or group operated from 1 location. The controller allows for 1-8 feeders to be operated up to 16 times per day. Each dry feeder allows you to dispense nuts, cubes, dry feed directly into your trough/manger.

Each feeder has its own power supply and one hard wired cable running to the controller

  • Capacity: 22kg each
  • Size: 40m*47cm*14cm each
  • Shell type: ABS Plastic with label
  • Box Material: Labelled ABS
  • Packaged weight: 15kg each
  • Each 12V unit comes supplied with 110/240V transformer
  • Not suitable for mixes, moist or wet feeds
  • Not suitable for chaff, alfalfa, straw, wet supplements or hay cubes
  • Maximum 8 feeders
  • Minimum 1 feeder

Supplied with

  • Simplefeeder owner & controller’s manual (1 off)
  • U Bolts & holding spacer & lock nuts (2 off) for mounting feeders on bars
  • Transformer 110/220VAC to 12V with 5m lead
  • Mounting Bar (1off) for mounting feeders on bars or walls
  • Wall mount anchor bolts (2 off)

C10 2X accessories B&W

Qty?
  • Optional Extras
  • Delivery
  • Help Centre
  1. Battery Connector - ideal for operating the feeder in a remote stable without electricity. The battery connector’s crocodile clips connect directly to any standard 12V battery (40Ah capacity) - view product
  2. Wall mounting Kit - includes the required elbow and pipe to allow it to pass through the wall once a hole has been cored thru or a block taken out - view product

The SimpleFeeder prices are inclusive of a 1 Year Warranty and Delivery Insurance.

How often will the feeder dispense food?

Up to eight times within a 24 hour period and on a 7 day cycle.

Do you complete installation?

We can also install the Feeder on request depending on location and number of Feeders required.

Recommended C30H Setup Procedure

  • Ensure it is plugged in and that the timer display is on
  • If the timer display is not “on” then please press the small reset button to get it going
  • Set the time to the current time
  • Set the start time to 1 hour before your feed and 30 minutes after (1.5-hour running time)
  • Example if you want to feed at 06:00 – set the start time to 05:00 and the finish time to 06:30

Things to watch out for

  • Ensure you have the heaters coming on for every feed not just the colder times of day
  • Ensure it is coming on 7 days a week (7 triangles)

What is the annual labour cost saving by using a C10 2X SiMPLEFEEDER?

Assume hourly cost of €10 US$ 12.50 or Stg£ 7.80 per hour.
A horse in training requires feeding four times a day.
Each feed requires at least 3 minutes of your time.
4 Feeding times x 3 min each x 365 days @ €10/hr.
Current Feeding Labour Cost = €730
3 min refilling time every 5th day x 365 days @ €10/hr & cleaning time.
SiMPLEFEEDER Labour cost = €80
No more overtime Labour rates.
Annual Labour Saving per SiMPLEFEEDER = €650 or US$819 or Stg£507

Is it difficult to install?

It is easy to install, just follow the simple instructions provided.

SiMPLEFEEDER is easy to install on the outside bars of a stable with all items provided. Just attach by screwing in 4 bolts to retain it, set timer and plug in.

For solid or cavity block stables, you just cut an opening in the solid or cavity blocks for the feed to slide down the stainless steel or plastic chutes down to the horse trough. Most professionals have solid block studs and they are more than willing to make the required opening. See the installation contents and how easy it is to bar-mount install a SiMPLEFEEDER in 15 minutes.

Have more questions?

You may also like…